2 BEST Windows Failure FIX

Windows failure can occur due to any changes in hardware or software. Certain changes can interfere with the normal boot process and make the boot loader clueless. Windows Failure can be from any recent change in hardware or software.  Read ahead to to find the root causes for windows failure and the 2 best windows failure fix.

On the hardware side, it could be that a disk with your windows files or your operating system for some reason is inaccessible to the boot manager. So maybe the disk got loose from the disc connector or in the worst case the disk fails to respond.

Talking about software, it could be that some applications or malware have managed to alter the path to your windows boot media due to which the boot manager is unable to locate the boot files during startup following which significant error takes place within the system.

Windows Failure – Reason and Fix

Let’s head over to know about the prominent causes which lead to windows failure.

Method 1: Check disk connector / boot order

Step 1: Check your C drive or the disc drive to ensure that the main operating system is properly attached to the connector of the system
Step 2: Open the hard drive and check if the drive is properly attached. Detach and reattach the drive if it’s not adjusted properly.
Step 3: Check within the BIOS system that the disk is added properly along with the boot devices.
Step 4: Identify the combination of keys that would work with BIOS.
Step 5: Press the power button and post that a logo would appear on the screen following which one needs to press the keys which would function the BIOS system.
Step 6: According to the BIOS setting, locate the boot tab and use the required function keys either plus or minus.
Step 7: Move the disk containing your operating system to the priority in the boot order.
Step 8: Go into the BIOS boot specification. Ensure that your C drive is properly positioned in priority order. The BBS controller present attaches bootable devices up to the BIOS boot device selection. Check that your main disk shows up there within its priority position.
Step 9: If you don’t see the hard disk in the BIOS, then chances are you might have a failing disk within the system.
Step 10: Test your disk using a SATA adapter to ensure that it’s functioning properly.
Step 11: Some laptops might not have the BBS option. Ensure that all attached discs in your computer are enabled. The disk containing your operating system is set to the priority in the boot order.
Step 12:

Remember to save any changes made in the BIOS using the f10 key
Step 13: Select option ‘Yes’ to self-change and then restart the system. This would probably fix the error within the system.

Also read: 8 Simple Fixes For “Windows 10 Error Code 0xc0000098”

Method 2: Use Bootrec to locate windows installation

Step 1: Attach Windows 10 USB stick and press the ‘Power Button’ on the computer to start the procedure. Use the corresponding ‘Function Key’ or combination of the function key and escape.
Step 2: Choose the boot device to boot from the USB.
Step 3: Select Windows 10 64 bytes or 32 bytes, depending on the platform at the initial page setup.
Step 4: Let the installation files get uploaded on the device.
Step 5: A page would appear on the screen. Select ‘NEXT’ and then click on the ‘Repair Your Computer’ option.
Step 6: Select troubleshoot and then click on the command prompt option.
Step 7: Type the command bootrec /fix boot and hit enter.
Step 8: Wait for some time until the procedure gets completed.
Step 9: Proceed further by typing the command bootrec /scanos, and hit enter once again. This command scans your entire disk to see if there are any windows installations implemented within the system.
This could take some time depending on your system specification, the size and the number of disks to scan.
Step 10: You will be informed if any windows installations are available within the system.
Step 11: Go ahead and add it back to the boot list so that the boot manager can locate it.
Step 12: Type command bootrec /rebuildbcd and hit enter. Wait for the process to run. It identifies the windows installation procedure and confirms with the user whether they want to add it to the boot list or not.
Step 13: For multiple windows installations, it will give you all the available installations and the corresponding drive where they are stored within the system.
Step 14: To add all the installations to the boot list, type A and hit enter to complete the process. It will work for single-window installation too.
Step 15: Type exit to close the terminal and restart your computer to see if it works.

Also read: Techniques To Solve ‘Windows Could Not Complete The Installation Error’

Conclusion

The above-mentioned techniques will help you to sort out the problems regarding windows failure due to recent hardware or software. The methods to fix windows failure are tested and tried to ensure a positive result. We assure our audience that these are some reliable technical processes that will help you to sort out windows failure.