Reason why iPhone 7 won’t turn on

The reasons why iPhone 7 won’t turn on aren’t fixed. It can be one or the other. For instance, the possible reasons can be the crash of software, damaged screen, Apple logo getting stuck while the phone is booting up that somehow provokes the screen of your iPhone to turn black.

iPhone 7 won’t turn on – FIX

If there is no noticeable reason for your iPhone not getting turned on, maybe there are slight issues with the firmware. If your phone has faced any liquid or physical damage, take help from Apple technical department. But before approaching them, try the mentioned methods to bring your phone back to life.

Method 1: Verification of the system crash

Step 1: Simultaneously hold on to the power key and volume down button for 15-20 seconds.
Step 2: If your phone has sufficient battery to turn on the device, the Apple logo will be displayed.
Step 3: After this, discharge both the keys and wait for the complete phone reboot.
This process is known as ‘soft reset’. It is hardwired in your phone. When you press and hold on to the applicable keys, the phone restarts. If your phone still doesn’t respond, go with the next methods.

Method 2: Sufficient battery status to power up the elements

If your iPhone 7 does not respond even after applying the soft reset method, the reason might be an insufficient level of the battery. For this, charge your phone for at least 10 minutes.

The charger plugin will charge your iPhone 7 but the next thing to determine is if your phone responds after detecting the flow of current via circuits.

If your phone does not respond, maybe the battery or some other element of your phone is damaged. At times, there are chances of improper charging.

If so then follow the steps below for resolving this issue at the earliest.

Step 1: Check if there is any physical breakage of the charging cable.
Step 2: Check the charger port for certain debris, corrosion, and lint that deter charging.
Step 3: Check if the charging pins are bent or not.
Step 4: Check your phone charging port is covered with corrosion or debris.
Step 5: Use some other charger.

Method 3: Liquid or Physical damage check

If you have mistakenly dipped your phone in water or made it fall heavily.
Physical damage can be easily detected if your phone has a crack or a dent outside. Damage caused due to liquid is quite difficult to find out. If your phone isn’t working properly after getting dipped in the water, then it might be liquid damage.
The IP67 rating gives the insurance of no liquid damage if dipped in water for a short time. Still, there are chances of your phone suffering from liquid damage. So you need to stay careful while handling your phone.

Method 4: Apple tech assistance

After trying the above 3 methods if your iPhone 7 won’t turn on, then you need to call the Apple technicians to resolve your issue.
You can visit any Apple store and discuss your issue with any technician. They’ll advise you if your phone is repairable or not depending upon the damage caused.

Also read: Unpairing Apple Watch With Or Without Apple iPhone: Multiple Methods

Conclusion for iPhone 7 won’t turn on

Dealing with electronic items isn’t easy. You need to stay careful while handling them and need to learn the ways to troubleshoot the minor issues instead of visiting any technician. If the problem is a major one, then only we suggest you visit the store to fix it. The mentioned methods are tried and tested and give a positive result unless the damage is a major one.

XDA T Mobile Note 4 Samsung Galaxy

This high-end android has some fantastic features such as 1440 X 2560 resolution on the 5″ 7 QHD super AMOLED display, 2.7 GHz quad-core processor, 32 GB internal storage, and 3 GB RAM. Video is recorded in 4K and has a camera of 16 MegaPixel sensors.

The most astonishing feature for its users is the ability to get connected to the headset of Samsung Gear VR. It is a device that makes the virtual world a reality by stereoscopic 3D imaging and head tracking at 360 degrees.

XDA T Mobile Note 4 Samsung Galaxy ROMs

All the users of Note 4 were pissed off due to the non-availability of TouchWiz. Later on, the availability of Custom ROMs made the experience of the current and upcoming users of Note 4 fantastic.
At present, the update of this device is pretty cool. But a lot more is still required to give their users the best they could have. The upcoming parts will be all about the ROMs for the Samsung Galaxy Note 4 in the year 2020.
The discussed ROMs increase the battery life, raise the device performance level, and also provides other additional features too like customization of the lock screen and navbar, note features, etc.

1. Custom ROM (Resurrection Remix 7.0.2)

a. It hinges on the most recent version of Android 9 along with slim.omni, original Remix, and CM.
b This is the reason for a perfect balance of customization, performance, and power in addition to the release of new features of the device.
c. A ROM with the customization features at a maximum level such as changes seen in the animation, status bar, app sidebar, widgets, lock screen, quick toggles, etc.
d. It is well known for its stability, concise nature, and enhancing the level of the device. A perfect ROM for the Samsung Galaxy Note 4.

2. Custom ROM (Lineage OS 15.0 and unofficial 16.0)

a. The arousal of this ROM was because of the Cyanogen end.
b. It hinges on the Android Oreo with an increased level of customization options along with an interface i.e. a complete stock android.
c. The efforts of the developers and Lineage team made its incorporation in every single device.
d. It’s a highly suggested ROM due to its stable nature. The most recent version has been developed unofficially but the recommendation rates are the same.

3. Custom ROM (Pixel Experience)

a. The name itself suggests the addition of pixels in the non-pixel and pixel devices as it can support the older and newer version of the Samsung Galaxy Note 4.
b. It is a complete package of pixel launchers, icons, fonts, and themes.
c. A ROM with less consumption of battery, stability, less bloated, and lightweight.
d. This ROM is hinged on the Android 9.0 Pie version.

4. Custom ROM (AOKP)

a. AOKP stands for the “Android Open Kang Project”.
b. It’s a unique ROM because it provides a stock android feature along with the additional feature.
c. You can check its bootable build on XDA that can be downloaded and installed directly.
d. This is also hinged on the Android 9.0 pie version and lineage OS is the source.
e. It is not the official version of the custom ROM.

5. Custom ROM (AICP)

a. This ROM aims to keep everything simple, neat, and clean.
b. Its developer started using this ROM firstly on HTC Desire HD. Earlier it was named AOKP.
c. Its overall performance has been remarked as good though it contains minor bugs. If you wish to report it to the developer, you can do this too.
d. It is not pre-rooted. Therefore, before using it don’t forget to root it first.

Also read: Download and Install CyanogenMod 13 Gapps for CM 13 ROM

Conclusion

That’s all about the XDA T Mobile Note 4 Samsung Galaxy. The reviews regarding the Samsung Galaxy Note 4, its features, and the availability of the custom ROM to make it a better device have been summarised in a clean and simple form to make you out of the dilemma of installing any one of them. Something more is coming soon in the world of technology that our team will be discussing with you after collecting the information from the maximum official sources too till then drop your comments below and let us know your review on this article too.

If you are a Samsung Galaxy J3 Luna Pro and need to root your device, you have arrived at the right place. In this article, we have gathered all the important information that you may require before you start rooting. We have tried to answer basic queries like prerequisites, requirements, and the procedure to flash the device.

Pre-Requisites

• The battery rate should be above 60%.
• Ensure that the USB Drives have been installed on the PC.
• You need to install the ADB and Fastboot drivers on the desktop.
• You need to enable the Developer Options as well.
• Also, make sure you have a backup of all the information on your device.

Device Details| SM-S327VL

FIRMWARE FILE

REQUIREMENTS

Procedure To Flash Samsung Galaxy J3 Luna Pro

1. Download the required “Files” and the Samsung Odin Tool.
2. Download the “Samsung USB Drivers” latest version.
3. Now, using “Winrar” or 7zip, extract the files.
4. Then, put the device into “Download Mode”.
5. Press and hold the Home+ Volume Down+ Power On buttons for at least 10 seconds.
6. To confirm Download mode, press the “Volume Up” button.
7. Now, install the already downloaded “Samsung USB Drivers”.
8. Start the “Samsung Odin”.
9. Run the setup.
10. Connect your “Device” to the desktop.
11. When the “Device Connection” is done, Odin will show the blue sign.
12. Now, using the AP or PDA button, select the “CF Auto Root” file.
13. On the re-partition, make sure it is “Not Ticked”.
14. To start the flashing process map, hit the “Start Button”.
15. Wait for some time till the “Process” is successful.
16. The device will reboot after the process is complete.

How To Install Samsung Odin Build Download 3.13.1

1. Download the Samsung Odin tool.
2. Download the WinRAR or 7zip software.
3. Now, install it and extract the Odin Tool.
4. Open it. Now, the Samsung-Odin can be extracted.
5. Download the Samsung USB drivers.
6. Install these drivers on your desktop.
7. Restart your Samsung phone in Download Mode.
8. Connect your Samsung Android phone to the desktop.
9. Then, select the required Flashing file or the Samsung stock firmware.
10. Now, click the start button. This will begin the flashing process.
11. When the process is complete, the Odin tool will show PASSED in green colour.
12. The device will reboot after the process is complete.

If you are looking to download the latest Odin, click here.

Also read: Simple Techniques to Root Samsung Verizon Galaxy Note 5

In Conclusion

Through this article, we have talked about the prerequisites required for rooting SM-S237VL, the details about the device, and the requirements. We have also described the whole procedure to Flash Samsung in detail. In addition to that, we have also ironed out the step-by-step procedure to install Samsung Odin Build. Make sure that your battery rate is 60%.
We hope that all queries about how to Root Samsung Galaxy J3 Luna Pro have been taken care of in this article. Hoping that you can Root SM-S237VL smoothly and efficiently.

“Android 7.0 Nougat” update is the recent update that has been released for “Samsung Galaxy Note 5 N920V”. Many of you have already installed this version of nougat.

In this vlog, we will describe complete working assistance to root “Samsung Verizon Galaxy Note 5 SM-G920V”. While rooting, you need to stay careful as one wrong step can brick your device.

After-effects of rooting

If you root ” Samsung Verizon Galaxy Note 5 SM-G920V”, you’ll be able to access many astonishing features that aren’t available in the non-rooted device such as you’ll be able to enhance the software code on your device or installation of some software that is not permitted by your device if it is non-rooted.

Features access after rooting

1. Hidden features get unlocked and you’ll be able to install apps on your device that are incompatible.
2. Apps such as Tasker can be easily installed to make everything automatic.
3. “Verizon Galaxy Note 5 SM-G920V” performance and battery life will get increased.
4. While using any app on your device, you won’t see any ads after being blocked.
5. Your data and apps will be backed up.
6. Apps that are bloatware will be removed from your device.
7. Flash ROM and Custom on Samsung Verizon galaxy note 5 roots.
8. You’ll be able to customize your device according to your wish.

Essential conditions needed before rooting

1. Make sure that you have installed android USB drivers on your PC.
2. Debug the USB on the device.
3. Follow the provided instructions carefully otherwise your device might face damages.
4. We suggest you backup your data and apps before you proceed with rooting.
5. Your battery charge should be more than 50-60℅ to avoid an unexpected shutdown.

Also Read: Security risks of rooting your smartphone

Technique to perform ” CF Auto-root pack” on “Verizon Galaxy Note 5 hiSM-G920V”

• Step 1: After installing and downloading the CF Auto-root pack, you are ready to move further:

A) Firstly, enable the debugging of the USB.

B) Along with the debugging of the USB, activate the developer option and follow the steps mentioned below.

•  Step 2: Visit the “Settings” option of your device.
•  Step 3: Select “About Phone”.
•  Step 4: Tap 7-8 times on the option of build number until a toast message of ” Developer option enabled” displays.

C) After you activate the developer option, again go to the settings and select the option of “Enable USB debugging” from the developer option.

• Step 5: Open the “ODIN v3.11.1.exe” file by right-clicking and selecting the option of “Run as administrator”.
• Step 6: Reboot the device in download mode.
• Step 7: Connect the android device to your PC by USB cables.
• Step 8: After connecting the USB cords, a blue sign appears with ” ID: COM” that indicates that the device is now connected by Odin.
• Step 9: Go to the Odin again and add the file named “CF Auto-root.tar”.
• Step 10: Ensure for unchecking of re-partition. Check the options of F-Reset time and Auto-Reboot.
• Step 11: Select the “Start” button. Wait for the “Pass” message on the screen. After it displays, removes the phone from the part.
• Step 12:After the process completes, the message “PASSED” or “RESET” appears. It relies on the downloaded Odin version. Now the device has rebooted. You can now remove your phone.

Also read: Odin Tool Samsung Flash Download (Latest)

Conclusion

While rooting “Samsung Verizon Galaxy Note 5 SM-G920V”, you need to stay calm and careful at each step to avoid any kind of damage or data loss. Every single step of rooting has been explained thoroughly with easy language after collecting the information from the official resources by our teammates. If you wish to root your device, go for it confidently.

The Solution – 4 Simple Methods to Fix LG V10 not Turning On

First, you need to make sure it is not due to a dead battery. Plugin your phone into a power outlet and check it. Now let’s look at some solutions to take care of this problem:

Method 1: Press the Power Button

The first step for getting rid of this error is to check the power button. Press the Power button several times to make sure that is not the cause of this error. Now if the issue is due to the malfunctioning of the power button, try pressing it hard a few times. If the screen does not power up, follow the next method.

Method 2: Boot To Recovery Mode and Wipe Cache Partition

To get your LG V10 phone to the Recovery Mode, you need to follow the steps given below:

1. Press the Volume-up button, Home button, and the Power buttons together at the same time. Hold them for a few seconds.
2. The phone will then vibrate. Upon vibrating let go of the Power button. Keep holding the other two buttons till the Recovery screen appears on the screen.
3. Proceed further to highlight the “wipe cache partition” option which needs to be done using the “Volume Down” button.
4. Press the Power button to opt for the above option.
5. The Cache Partition will now be cleared.
6. After it is cleared, the LG V10 phone will automatically reboot.

Method 3: Boot To The Safe Mode

Booting to Safe Mode runs only on default apps. This will show that the application was running as a 3rd party and was the prominent cause of the error. The following steps will help you in booting the phone to Safe Mode:

1. Press the Power button. Hold it till the LG logo appears on the screen.
2. After that, leave the Power button and press the Volume Down button. Hold this button.

The Safe Mode text will appear at the bottom left corner of the screen.

Method 4: Factory Reset

Factory Resetting the phone is another effective way of fixing the “LG V10 won’t power on” error. It can also solve other problems like the touch screen being unresponsive, a problem accessing the menu, or a problem remembering the password. Factory Reset can be done using the hardware keys. The procedure to do it has been detailed below:

1. Turn the smartphone off.
2. Press the Volume-up button, Home button, and the Power buttons together at the same time.
3. Hold it till the Android icon appears on the screen.
4. Use the Volume Down button. Hit the Power button to choose the wipe data/factory reset option.
5. Highlight Yes with the Volume Down button. Delete all the user data by pressing the Power button.
6. After rebooting the LG V10 phone, select using the Power button.
7. Everything will be wiped clean after restarting the LG V10.

Note: Do not forget to backup all the important files and information before rebooting the phone.

Method 5: Technical Support

If none of the procedures mentioned above was fruitful, it is best to get help from experts if your phone does not power on even after charging and booting, then there is some other reason for this error. The technical support at the store where you got the phone from verifies that the phone is faulty and replaces it soon. The other option available to you is New phone or an insurance replacement.

Also read: Unlock Vivo Y937 Mobile Phone – Reset Method & Google Account

In Conclusion

The above-given methods may help fix the error. However, if you plan on buying LG V10, do not let this issue be a factor. Most of these issues are addressed and fixed in updates as they are mainly due to the software. If you are looking for features like durability and a good camera, you should go for purchasing the smartphone of your choice.

If you know of any other methods that will solve this error, please let us know by dropping a comment below.

So, if you’re dealing with issues with your phone and would like to upgrade it for a smooth run, this article is surely going to provide you with the perfect solution.

What does it mean to Flash a file?

Flashing or downloading a zip file onto your device is usually performed to install a custom ROM (a customized version of ANDROID) within the device. There are different methods of flashing for different devices.

Features of stock firmware include repairing boot loop issues, software issues, and unbricking the device.

Samsung J100H Flashing

Removal of prevailing stock Firmware from Samsung J100H device and then replacing it with the same version or any other version can be called Samsung flashing.

Technique to flash Samsung J100H using Flash tool; ODIN

Samsung J100H can be flashed with the flash ODIN Flash tool. Following are the guidelines that one can follow while flashing the device through the Odin tool, but before that one needs to be ready with some basic preliminaries.

Preparations:

• Firstly, you need to backup all of your important data stored, to prevent data loss.
• Your Samsung Smartphone should have at least 60-70% battery to perform the flashing process. It is highly essential as if the phone runs out of battery in between the flashing process, it can brick your device.
• Do not have any Samsung file running in the background neither should it be installed on your computer.

Also Read: Samsung SM-J600G Flash File Firmware (Stock ROM)

Steps to Flash Samsung SM-J100H

• Step 1: Install the Samsung J100H flash file.
• Step 2: Then download and locate the Odin Flash tool on your PC.
• Step 3: Open the extracted folder.
• Step 4: Click on the Load Packet button and select the Samsung J100H  flash file.
• Step 5: Then tap on the Downloading button.
• Step 6: Furthermore the flashing procedure will commence within the device.
• Step 7: Connect the USB along with the PC.
• Step 8: ‘Pass’ message will be displayed on the screen after the flashing procedure is over.
• Step 9: After flashing is completed reboot the phone and then the phone is ready to use.

Conclusion

Flashing via the flash tool is a cumbersome process as it requires several things to get done and likewise takes a lot of time. Also, when you’re adopting this technique to flash your Samsung J100H device, make sure you have created a backup of all the data stored in your phone to prevent data loss.

In this article, we will now discuss the steps following which one can flash Xiaomi Redmi 4x Miui 11 during troublesome conditions.

Xiaomi Redmi 4x Miui 11 Flash File

Xiaomi Flash Tool

Steps to Flash Xiaomi Redmi 4X Miui 11

• Step 1: The first step deals with extracting the Xiaomi Redmi 4X Miui 11 Flash File which was downloaded on the computer.
• Step 2: Extract the particular flash file.
• Step 3: There will be the availability of 4 different files in the computer,i.e,  File Flash, USB driver, Flash Tool, and a guiding manual with relevant information on how to perform the flashing procedure in Xiaomi Redmi 4X Miui 11 post extracting the flash file.
• Step 4: Now download the Xiaomi Redmi 4X Miui 11 flash file and proceed with connecting the phone via the USB cable through the PC.
• Step 5: Remove the battery of the smartphone.
• Step 6: Connect the battery and then shorten the test point.
• Step 7: There will be the availability of a port under the device manager which would be named as “Qualcomm HS-USB QLoader 9008”. This would approve the installation of the USB driver in the computer system.
• Step 8: Proceed with downloading and running the MI flash tool.
• Step 9: Keep the flash file on the folder and allot a specific folder path to the flash file.
• Step 10: Tap on ‘Refresh’ and then click on the flash button.
• Step 11: The flashing procedure would commence on the device.

Also Read:  Samsung SM-J600G Flash Firmware

File flashing is a crucial process and that’s the reason we have provided a guiding tutorial manual so that its easy for the users to execute this procedure without any hassle.

Guiding Tutorial For Flashing Xiaomi Redmi 4X Miui 11

Conclusion

The file flashing procedure doesn’t vary much within different smartphones and is asserted to be somewhat similar to each other but the instructions and precautions remain the same such as taking all the required backup of the data before performing this procedure as file flashing eventually leads to deletion of all the data from the phone. Also, for the betterment of users, we have provided authentic links from trusted websites and have scanned them via Kaspersky Antivirus so that users have the access to all the flash files and tools required for the execution of this procedure.

This article deals with the information to install or download Moto XT1721 Stock Firmware ROM  (flash file). Firmware is a combo of the flash file, flash tool, and a manual that provides guidelines about flashing. The official links are also provided to install the same. Flash file is the same as Operating system in PC which manages hardware and software services for the phone. Stock ROM is also known as flash file, firmware, etc.

So, if you’re dealing with issues with your phone and would like to upgrade it for a smooth run, then this article is surely going to provide you with the perfect solution.

What Does It Mean To Flash a File?

Flashing or downloading a zip file within the device is usually used to install a custom ROM (a customized version of ANDROID) onto the device. There are however different methods of flashing for different devices. Features of stock firmware include repairing boot loop issues, software issues, and unbricking the device. Removal of prevailing stock Firmware from Moto XT1721 device and then replacing it with the same version or any other version can be called Micromax flashing. Flashing simply means changing the operating system.

Technique To Flash Moto XT1721 using Flash tool; SPD Upgrade

Moto XT1721 can be flashed with the flash tool SPD Upgrade. Following are the guidelines that one can follow while flashing the device through the SPD tool, but before that one needs to be aware of some basic and important preliminaries.

Preparations:

• Firstly, you need to backup all of the important data stored in the device to prevent data loss.
• Your Samsung Smartphone should have at least 60-70% battery to perform the flashing process. It is highly essential as if the phone runs out of battery in between the flashing process, it can brick your device.
• Do not have any Moto file running in the background neither should it be installed on your computer.

Following Are The Steps To Flash Your Moto XT1721 device:

• Step 1: Install the Moto XT1721 stock firmware. In firmware, you will get a flash file, flash tool, and USB Drivers.
• Step 2: Then download and locate the SPD UpgradeDownload Flash tool on your PC.
• Step 3: Open the extracted folder.
• Step 4: Now open the UpgradeDownload.exe file in the same folder.
• Step 5: Click on the Load Packet button and select the Moto XT1721 flash file.
• Step 6: Then click on the Start Downloading button.
• Step 7: Now the flashing procedure will commence.
• Step 8: Connect USB to your PC.
• Step 9: After the flashing process is completed successfully further ‘Passed’ message will be displayed on the Progress bar.
• Step 10: After flashing is completed reboot the phone and the phone is ready to use.

Also Read:  Samsung J200G Flash File (Stock Firmware)

Conclusion

Flashing via the flash tool is a cumbersome process as it requires several things to get done and likewise a lot of time. Also, when you’re adopting this technique to flash your Moto XT1721 device, Make sure you have created a backup of all the data stored in your phone to prevent data loss.

In this article, we will now discuss the steps following which one can flash Samsung SM-J600G during the troublesome conditions.

Samsung SM-J600G Stock Firmware File

Steps to Flash Samsung SM-J600G Stock ROM 

• Step 1: You need to switch off the smartphone for performing the flashing procedure on the Samsung J600G flash file.
• Step 2: Proceed with pressing both the volume keys and then connect the USB cable for shifting in the download mode.
• Step 3: Extract and open the Odin Flash Tool.
• Step 4: Choose the specific BL file.
• Step 5: Tap on AP and PDA and post that select AP file.
• Step 6: Tap on CP and choose Modem file.
• Step 7: Tap on CSC and choose the CSC file.
• Step 8: Post all the selection process the smartphone will get detected within the device.
• Step 9: Tap ‘Start’ on the system and installation will take place.
• Step 10: The smartphone will get started post the process of installation is complete.

Also Read: Samsung J500F Flash File Firmware

File flashing is a crucial process and that’s the reason we have provided a guiding tutorial manual so that it’s easy for the users to execute this procedure without any hassle. 

Follow Guidelines to Flash Samsung SM-J600G Stock ROM Firmware

Conclusion 

The file flashing procedure doesn’t vary much within different smartphones and is asserted to be somewhat similar to each other but the instructions and precautions remain the same such as taking all the required backup of the data before performing this procedure as file flashing eventually leads to deletion of all the data from the phone. Also, for the betterment of users, we have provided authentic links from trusted websites and have scanned them via Kaspersky Antivirus so that users have the access to all the flash files and tools required for the execution of this procedure. 

Micromax A311 Flash File With Guidelines

Launched in December 2014, Micromax A311 turned out to be a great opportunity for potential buyers. Users liked its performance owing to its 4G, 3G services, and a lot of new features were introduced in this latest Micromax model. Removal of prevailing stock Firmware from Micromax A311 device and then replacing it with the same version or any other version is asserted as Micromax flashing.

Techniques to Flash Micromax A311 using Flash tool; YGDP

Micromax A311 can be flashed with the flash tool YGDP tool. Following are the guidelines that one can follow while flashing the device through the flash tool, but before that one needs to be aware of some basic and important preliminaries.

Preparation Guidelines

• Firstly, you need to backup all of the important data stored in the device to prevent data loss.
• Your Micromax device should be at least 70-80% charged to avoid any kind of halt in the process. It is highly essential as if the phone runs out of battery in between the flashing process, it can brick your device.
• Do not have any Micromax file running in the background neither should it be installed on your computer.

Steps to Flash Micromax A311 Device

• Step 1: Install the Micromax A311 flash file.
• Step 2: Then download and locate the YGDP Flash Tool on your PC.
• Step 3: Open the extracted folder.
• Step 4: Click on the Load Packet button and select the Micromax A311 flash file.
• Step 5: Now click on  “download”.
• Step 6: Immediately the flashing process will begin.
• Step 7: Connect USB to your PC.
• Step 8: After the flashing process is completed successfully further ‘Passed’ message will be displayed on the Progress bar.
• Step 9: Now, your phone is flashed and ready to use.

Also Read: Samsung J701 Flash File

Conclusion

Flashing via the flash tool is a cumbersome process as it requires several things to get done and likewise a lot of time. Also, when you’re adopting this technique to flash your Micromax A311 device, make sure you have created a backup of all the data stored in your phone to prevent data loss.