Fix The Error Message “This Device Is Not Configured Correctly (Code 1)”

The error “The device is not Configured” is also referred to as Code 1 error. This problem occurs when a driver in the device is facing some problem. The driver may not be installed properly or there is a configuration problem. This error arises due to a problem in the software.

There are various reasons for the error, Code 1 to be displayed on your device. The problem is due to the driver. Hence, Windows would be unable to load important drivers to run the device.
The cause of this error is:

• An appropriate driver is unavailable in the device.
• Incorrect configuration of a driver.
• The driver is not updated or is corrupted.

Note: This error may occur on all versions of Windows and does not imply a fault in the hardware.

Method 1: Update The Drivers Present In The Device

1. Press Windows+R. This will open the Run Command.
2. Type msc in the Run command.
3. Press on the OK button.
4. In the Device Manager, expand the menus. The devices with a yellow exclamation mark before them need to be selected.
5. From the menu bar, select Action.
6. From the submenu, press on Update driver/ Update Driver Software.
7. For the updated driver software, choose the option Search Automatically.
8. After completion of the process, reboot the device.

Also Read: Error Message “Driver wudfrd Failed To Load” 5 Quick Fix

Method 2: Manually Uninstall The Device Causing Trouble

1. Go to My Computer (This PC icon) present on the desktop of the device.
2. Select the Manage option from the menu.
3. Go to Computer Management (local) option and choose Manage.
4. Press on the Device Manager option.
5. From the menu present in the right panel, select the device with the error.
6. Select the option to Uninstall the device option by right-clicking on the specific device.
7. Press on the Uninstall option.
8. Select Yes in the System Settings Change window.
9. This will restart the device.
10. From the menu bar, select Action.
11. Press on the Scan button for changes in the hardware.
12. Visit the official website of the device and download all the required drivers.
13. After installing the new drivers, reboot the device.

Method 3: Manually Modify The Registry Editor

1. For safety measures, a backup of the registry should be created and it can be done by following the steps given below:
2. Go to the Menu bar.
3. Select the Export option.
4. Under the Export range option, check for All.
5. Save the backup with a name. You can choose the storage location by yourself.
6. Press the Save button.
7. If the error is occurring due to some issues in the USB device, then the Upper and Lower Filters in the registry need to be deleted.
8. Press Windows+R. This will open the Run Command.
9. Type Regedit in the Run command.
10. Press the Enter key.
11. Navigate to and expand the HKEY_LOCAL_MACHINE, Control, Class, and System.
12. Then enter {36fc9e60-c465-11cf-8056-444553540000}.
13. The UpperFilters option can be found in the right pane. Select it.
14. Then press the Delete button.
15. Click the OK button.
16. Now for deleting the LowerFilters, go to the right pane again.
17. Press on the Delete button.
18. Press the OK button.
19. Close the window.
20. Reboot the device.

Also Read: Techniques To Solve ‘Windows Could Not Complete The Installation Error’

Method 4: Hardware Troubleshoot

1. Press on the Start menu.
2. Search for the troubleshoot option.
3. Select the Troubleshooting option.
4. To open the Troubleshooting option, click on View All. it is available on the left panel.
5. Press on the option “Hardware and Devices Troubleshooting.”
6. Start the process by pressing the Next button.

Conclusion

This article will help in fixing the error that occurs due to problems with the drivers present in the device. The methods given in this article can be trusted and relied on as these will give you positive results. We hope you found this article helpful in resolving this technical error.