Samsung J701F Flash File- Flashing Methods

The article deals with the information to install or download Samsung j701f Stock Firmware ROM  (flash file). Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver, and How-to Flash Manual. The official link is also provided to install the same. The flash file in Android is just like the Operating system in PC which manages hardware and software services for the phone. Flash file is usually referred to as Stock ROM, Firmware or ISO image files.

What Does It Mean To Flash A File?

Flashing or downloading a zip file onto your Android device is usually used to install a custom ROM (a customised version of ANDROID) onto your device. The process changes depending on the device.

Importance Of Flashing File

The Stock Firmware (flash file) helps solving  Software related issue, boot loop issue, and IMEI issue, and recovers Mobile phones in such cases. Stock firmware can also be used to reinstall the OS on your Mobile Devices.

Flashing in

Removal of prevailing stock Firmware from Samsung j7 device and then replacing it with the same version or any other version can be called as Samsung j701 f flashing. Flashing simply means changing the operating system.

Flashing can be done with two methods, i.e, Recovery mode and Flash tool.

Technique To Flash Samsung J701F Using Flash Tool Odin

Samsung J701f can be flashed with the flash tool Odin. The instructions given below can be followed using Samsung’s Firmware Flashing tool, Odin on Windows Computer. Before you proceed with the Samsung firmware flashing, there are some steps you need to follow, so that the flashing process progresses smoothly.

Preparations:

• If possible, back up all of your important data stored on your phone to a safe place like a computer.
• Your Samsung Smartphone should have at least 60-70% battery to perform the flashing process. It is highly essential as if the phone runs out of battery
  in between the flashing process, it can brick your device.
• If you have Samsung Kies installed on your computer and it is running in the background, it is recommended to kill it to avoid interfering with the Odin Flash Tool.

Also Read: HTC Desire 826 Flash File

Steps To Flash Samsung J701F

• Step 1:  Download and locate the Samsung Galaxy J7 Nxt SM-J701F firmware package in your PC.
• Step 2: After locating you will find USB Drivers, flashing tools, and firmware files.
• Step 3: Install the USB drivers needed for your Samsung j701 device on your computer. Skip this step if you already have the drivers installed on your PC.
• Step 4: Install the firmware In your computer and load the Samsung Galaxy J7 Nxt SM-J701F firmware files inside the flash tool.
• Step 5: Switch off your Samsung j701f device by pressing and holding Volume up, power button or volume down, and power button key.
• Step 6: Connect your device to the computer using USB cable.
• Step 7:  Begin the firmware flashing and process.
• Step 8: Once the flashing is completed, you will see a success message.
• Step9: Disconnect your Samsung Galaxy J7 Nxt SM-J701F device from the computer and restart the device.

Conclusion

Flashing via flash tool is a cumbersome process as it requires several things to get it done and likewise a lot of time. Also, when you’re adopting this technique to flash your Samsung j701f device, make sure you have created a backup of all the data stored in your phone to prevent data loss.