USB Composite Device Can’t Work Properly With USB 3.0 – (8 Quick Fixes)

Facing USB Composite Device Can’t Work Properly With USB 3.0 error message? If you have recently bought a laptop or a desktop, then all the USB ports in the device will most probably be USB 3.0 ports. This version is more reliable and faster. USB 3.0 is faster than the 2.0 version and operates in the backward direction. This means that devices with the 2.0 connectors will also be compatible with the 3.0 version. All external devices are connected to your desktop through USB cables and ports. Therefore, all USB ports being the 3.0 version may make it difficult to be compatible with other devices in some cases.

The most common problem – USB Composite Device Can’t Work Properly With USB 3.0 – arises while connecting peripheral devices like printers that are of older versions. The older version of printers is not compatible with the newer version. Hence, while connecting the printer with the 3.0 version the error message – USB Composite Device Can’t Work Properly with USB 3.0 – may be displayed.

The Solution to USB Composite Device Can’t Work Properly With USB 3.0 error

In this article, 8 quick fixes for USB Composite Device Can’t Work Properly With USB 3.0 error have been mentioned which will help the customers to resolve the issue. Keep reading to find the quickest fixes for USB Composite Device Can’t Work Properly With USB 3.0 error.

Solution 1: Install the printer driver manually

Generally, Windows 10 finds the correct drivers for new devices being connected to the device. But, when peripheral devices like old printers need to be connected, then Windows may find the correct driver for the function, but it might not function properly.

In that case, to find out if there is a problem with the driver, the steps given below can be followed :

· Click on the Control Panel.
· Select Hardware and Sound.
· Click on Devices and Printers.
· If there is an exclamation (!) mark beside the printer icon, new drivers need to be downloaded for proper functioning.

The right driver for the printer can be found in the printer installation disk that comes with the printer. Otherwise, it can be found online.

Note: Use only the official download pages. If a Windows 10 driver is not found, downloading a Windows 8 compatible driver will create problems.

Solution 2: Disable and Re-install the USB controllers

The native USB drivers can be disabled and re-enabled, as there might be some problems inside the USB controller. This procedure is simple and safe. Windows scans the hardware changes and reinstalls the right drivers. All this is done automatically.

The steps to disable and reinstall are as given below:

· Click on the Windows key + R. This will open the Run command. Type in “devmgmt.msc”.
· Press Enter. This will open the Device Manager.
· Proceed further by scrolling down the Universal Serial Bus controllers.
· Click on Uninstall present on the first USB controller.
· Repeat this process for all the USB controllers that have been listed under Serial Bus Controllers.
· After the uninstallation, restart the device.
· After the restart, Windows will search for the hardware changes and will install all the drivers that are missing.
· After that, plug in the printer and check for the error message.

Solution 3: Use Auto Repair Print Tool (Only for HP users)

Only HP printer manufacturers have a software called Print and Scan Doctor. This software detects and resolves issues with compatibility. For this software to work, just download the tool, which is available on HP’s official website. Then run the executable.
Print and Scan Doctor detects the issues with USB connections automatically. It then resolves USB Composite Device Can’t Work Properly With USB 3.0 error with some fixes automatically.

Also read: Best HP laptops: Top Picked Laptops for Home and Business

Solution 4: Windows USB Troubleshooter

There is a web-based diagnostic and repair application available in Microsoft that works automatically. The Windows USB Troubleshooter will only work if the tool is downloaded from the official Microsoft website.
Using it is very simple as the steps are prompted on the screen upon downloading it. The fixes required to care for theUSB Composite Device Can’t Work Properly With USB 3.0 issue will automatically be taken care of at the end.

Solution 5: USB Legacy Support

If the printer is still not compatible and error USB Composite Device Can’t Work Properly With USB 3.0 is shown, then USB Legacy Support may be enabled for the USB Controllers. The following steps may be followed:
1. Open the BIOS/UEFI settings.
2. Check whether USB Legacy Support has been enabled for the USB Controllers. This can be found in the same categories or in different categories named Standard and USB 3.0.
3. If the device has ASUS Bios, the USB Legacy Support is available in the Advanced tab.

Solution 6: Use an expansion card

If the problem persists, using hardware will help. A USB 2.0 hub can be bought and connected to the USB 3.0 port. This will take care of the compatibility issue and will resolve the problem. If a desktop is being used then a PCle USB 2.0 expansion card can be used. This is a cheaper option than using a USB 2.0 hub.

Solution 7: Do not turn off the device

If the printer is disappearing after connecting for a little while, it means this is being caused due to a glitch in Windows. Given below are the steps to handle such errors:

• Select Windows key + R.
• The Run command will open.
• Type in “devmgmt.msc”.
• Press Enter.
• This will open Device Manager.
• Scroll down to USB Serial Device Controllers.
• You will find USB Root Hub entries.
• Select the USB Root Hub by right-clicking.
• Choose Properties > Power Management Tab.
• Proceed further to choose the option “Allow the computer to turn off this device” which will help in saving energy. Uncheck the box next to it.
• Click Ok. This will save your selection.
• Restart the device.
• Connect the printer to the device.

Solution 8: Use the charging port

If the methods given above did not fix USB Composite Device Can’t Work Properly With USB 3.0 error, the charging port can be used to connect the printer to the device. This method is a long shot and may be able to get rid of the error message as the charging port provides more power than the regular ports.

Also read: No Such Interface Supported Error – 6 BEST Fixes

Conclusion

There might be various reasons for errors to arise in computers but the solutions can often be found easily. The easiest solutions for the error message USB Composite Device Can’t Work Properly With USB 3.0 are given in this article. We hope this article helps our audience to settle this error.