Your PC Needs to be Repaired Error FIX

The error Your PC needs to be repaired appears on the screen of Windows version 8 & 8.1 and is identified with a specific code of the error. The same issue can occur in Windows version 7 and Windows Vista but it does not appear on the screen with the title – Your PC needs to be repaired. The user can use the displayed error code with message – Your PC Needs to be Repaired Error –  to fix the error.

Your PC Needs to be Repaired Error can occur due to a corrupt or missing BCD, or either due to compromising the integrity of the file system by making the file system damaged or corrupt. These errors are formed during the BCD manual configuration, and when the computer turns off while writing something important, or boot sector viruses.

Your PC Needs to be Repaired Error FIX

Here is a list of solutions to fix Your PC Needs to be Repaired Error.

Method 1: Run the program of System file and Disk check

This is the very first method to deal with Your PC needs to be repaired error. As mentioned above, one of the causes for the error message Your PC needs to be repaired is because of the damaged or corrupted system files. To solve this issue, run the program of system file and disk check. It will repair your computer.
Step 1: Attach the ‘Windows Bootable Drive’ with the computer and start booting from it.
Step 2: Choose the language preference and select ‘Next’ to continue.
Step 3: Select ‘Repair your computer. It will boot into the page of the ‘Advanced options.
Step 4: Select ‘Command Prompt’.
Step 5: Type ‘SFC /scan now and hit ‘Enter’.
Step 6: Type ‘chkdsk c: /f /r’ and hit ‘Enter’.
Step 7: Type the subsequent commands in the ‘Command Prompt’ and hit ‘Enter’ after typing every command. The commands are:
diskpart
list volume
exit
c:
dir
If you are unable to find the boot files in the C Drive, type the subsequent commands to check the other volume until and unless you find the correct place.
e:
dir

Method 2: Automatic or Startup repair of the computer

Step 1: Switch off the computer and attach the ‘Installation media’ such as DVD, USB flash drive, etc. Restart the computer.
Step 2: Press a specific function key if you have used a USB flash drive. Press any key if you have used a DVD to boot the computer from an installation media.
Step 3: Select the language preference and proceed further.
Step 4: Select ‘Repair your computer.
Step 5: Choose the option of ‘Troubleshoot’.
Step 6:

Select ‘Startup Repair’.
Step 7: After the completion of startup repair, check for the error code, if it continues to persist or not.
Step 8: If the message of ‘Press the Advanced option to try other options to repair your PC or shut down to turn off the PC. Log File:’ appears, it indicates that the process of startup repair failed and you need to opt for some other methods to fix Your PC Needs to be Repaired error.

Method 3: Make a BCD

Step 1: Attach the ‘Windows Bootable Drive’ to the computer and start booting from it.
Step 2: Choose the language preference and select ‘Next’ to proceed further.
Step 3: Select ‘Repair your computer.
Step 4: Select ‘Troubleshoot’.
Step 5: Choose the option of ‘Command Prompt’ from the page of the ‘Advanced options.
Step 6: Type ‘bcdboot c:\windows’ and hit ‘Enter’.
Step 7: It will copy the Boot file of BCD from the present Windows partition to the system partition and will make the BC in the same partition.
Step 8: Restart the computer.

Also read: Windows Cannot be Installed to Disk 0 Partition 1 Error FIX

Method 4: Reconstruct BCD

Step 1: Attach the ‘Windows Bootable Drive’ to the computer and start booting from it.
Step 2: Choose the language preference and select ‘Next’ to proceed further.
Step 3: Select ‘Repair your computer.
Step 4: Select ‘Troubleshoot’.
Step 5: Choose the option of ‘Command Prompt’ from the page of the ‘Advanced options.
Step 6: Type the subsequent commands in the ‘Command Prompt’ and hit ‘Enter’ after typing every command. The commands are:
bootrec.exe / Rebuildbcd
bootrec.exe /Fixmbr
bootrec.exe/ Fixboot
Step 7: Type the subsequent commands in the ‘Command Prompt’ and hit ‘Enter’ after typing every command. The commands are:
bcdedit/export C:\BCD_Backup
c:
cd boot
attrib bcd –s –h –r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
Step 8: Type ‘Exit’ and hit ‘Enter’.
Step 9: Restart the computer.

This was our list of BEST methods to fix the Your PC needs to be repaired error.

Conclusion

This article has summoned up the best and simple ways to tackle the error Your PC needs to be repaired. Try to reboot the computer but before that, you need to backup all the important data and files by using any backup software such as ‘MiniTool Partition Wizard’

or ‘MiniTool Power Data Recovery‘. If you are confused or have any queries regarding the solutions, we welcome you wholeheartedly to contact us through the comments section. We will try our best to sort out your issues as soon as possible. Till then be a tech genius by fixing these computer errors with the easiest methods curated by us.